Signalmanagement HallResearch

UHBX-SW3-S Auto-Switching Transmitter

The UHBX-SW3-S is a multi-input and HDBaseT sender. The device accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI 1 input also supports MHL (Mobile High-Definition Link) with phone- charging feature.  

4100000054

UHBX-S-PD HDMI+RS232+IR+PoH Sender

UHBX-S-PD can extend HDMI or single- link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m) over single Cat-5e/6 cable.  

4100000051

UHBX-S-PSE HDMI+RS232+IR+PoH Sender

UHBX-S-PSE can extend HDMI or single- link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m) over single Cat-5e/6 cable.  

4100000052

UHBX-R-PD HDMI-RS232-IR-PoH Receiver

UHBX-R-PD can extend HDMI or single- link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m) over single Cat-5e/6 cable.  

4100000047

UHBX-R-PSE UTP Receiver

UHBX-R-PSE can extend HDMI or single-link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m) over single Cat-5e/6 cable.  

4100000048

UH-1BTX S HDBT Extender, 100 m

Extend HDMI or DVI over single Cat- 5e/6 up to 330 ft (100 m) Utilizes HDBaseT™ Class B (HDBaseT™) extension technology Full HD support 1080p deep color, 3D, and 4K x 2K  

4100000064

UH-1BTX R HDBT Receiver 100 m

Extend HDMI or DVI over single Cat- 5e/6 up to 330 ft (100 m) Utilizes HDBaseT™ Class B (HDBaseT™) extension technology Full HD support 1080p deep color, 3D, and 4K  

4100000063

UH-1BT-R HDMI Extender HDBT Receiver

UH-1BT-R is an HDBaseT Class B (HDBaseT-Lite) Receiver used to extend HDMI or DVI video signal up to 230 ft (70 m) over a single UTP cable.  

4100000041

UH-1BT-S HDMI Extender HDBT Sender

UH-1BT-S is an HDBaseT Class B (HDBaseT-Lite) Sender used to extend HDMI or DVI video signal up to 230 ft (70 m) over a single UTP cable.  

4100000042

UHBX-3S HDMI-HDBT 1 x 3 Splitter

The UHBX-3S is an HDMI splitter with one local HDMI output and 3 HDBaseT outputs for extension to compatible receivers up to 150 meters using a single UTP. The splitter supports HDCP, 3D, Deep Color and CEC.  

4100000044

UHBX-4X HDMI-HDBT Multiport S

Verfügt über 4 HDMI Eingänge und 4 korrespondierende HDBaseT Ausgänge, also 4 HDBaseT Extender in einem gemeinsamen 19 Zoll Gehäuse. Die integrierte PoH Funktion (Power over HDBaseT) ermöglicht die Spannungsversorgung der Empfänger über das Cat-Kabel durch den Splitter (zusätzliches Netzteil 4100000061 erforderlich). Wir empfehlen die Verwendung der HDBaseT Receiver UHBX-R-PD mit PoH Unterstützung (4100000047). Überträgt RS232 und IR Signale gezielt zu den angeschlossenen Geräten.  

4100000069

UHBX-8X HDMI-HDBT Multiport Sender

The UHBX-8X is a 1 RU box that converts 8 HDMI inputs to corresponding HDBaseT outputs for extension to 150 meters (500 ft) on single UTP.  

4100000046

Daisy Chain HDBT Receiver

Available August 2015 UHBX-R-XT is an HDBaseT receiver with both HDMI output for connection to a local display as well as a re-buffered HDBaseT output so it can be used in a daisy chain.  

4100000050

UH2X-P1 HDBT Set 100/150 m with USB

HDBaseT 2.0 Set bestehend aus Transmitter und Receiver - zur störungsfreien Übertragung von HDMI, USB 2.0, IR, RS232 und Netzwerk Signalen über bis zu 100 m Cat-5E/6/7 Kabel. Unterstützt ARC (Audio-Return-Channel) Wahlmöglichkeit des Audiosignals: zusätzlicher Coax Eingangs oder HDMI Audio Signal des Displays Der Transmitter versorgt den Receiver per PoH über das Cat-Kabel mit Strom. Die beiden USB 2.0 Schnittstellen am Receiver arbeiten als USB Hub. Unterstützt: HDMI 1.4, 4K2K: 3840x2160@24/25/30, 4096x2160@24, 3840x2160@60 (4:2:0), Deep Color, 3D, HDCP, CEC und EDID Durchleitung  

4100000067

UHBX-S-WP HDBT Wallplater Sender

The UHBX-S-WP is an HDMI on Cat-6 (HDBaseT) single wall plate transmitter. The package includes the following: UHBX-S-WP Decora metal insert Standard white plastic Decora face-plate Mud-ring for dry wall installation.  

4100000053

UHBX-SW3-WP Auto-Switching Wall-Plate

The UHBX-SW3-WP is a multi-input wall-plate sender and an HDBaseT receiver. The wall-plate accommodates 2 HDMI and 1 VGA inputs with audio.  

4100000055

SP-HD-2A 1:2 HDMI Splitter

The SP-HD-2A splits DVI or HDMI audio/video source for display on two identical outputs. It supports HDTV resolutions to 1080p, is HDCP compliant, and is fully compatible with HDMI 1.4 deep color and 3-D formats.  

4100000032

SP-HD-4A 1 x 4 HDMI Splitter

The SP-HDMI-4A is used to split an HDMI audio/video source for display on 4 outputs. It supports HDTV resolutions to 1080p and 4Kx2K.  

4100000030

SP-HD-8A 1:8 HDMI Splitter

The SP-HD-8A splits DVI or HDMI audio/video source for display on eight identical outputs. It supports HDTV resolutions to 1080p, is HDCP compliant, and is fully compatible with HDMI 1.4 deep color and 3-D formats.  

4100000031

HDMI 4-Port Switch

The SW-HD-4 is a 4 input HDMI switcher with InstaPort Technology from Silicon Image enabling fast switching of four HDMI sources to a single HDMI output. The switcher supports 4K (UHD), 3D, 36-bit Deep Color video.  

4100000033

SW-HDMI-4 HDMI 4-Port Switch

This model is a high performance HDMI Switcher capable of switching and boosting 4 independent HDMI Video and Audio sources to 1 output.  

4100000034

HSM-04-02 4 x 2 HDMI Matrix Switch

4 x 2 HDMI 1.3 matrix switch with RS232 control. Supports HDCP, deep color, multi-channel digital audio (up to 7.1 channels), and may be used with any combination of DVI (PC) or HDMI (HDTV) sources and displays.  

4100000021

HSM-04-04 4 x 4 HDMI Matrix Switch

4 x 4 HDMI 1.3 matrix switch with RS232 control. Supports HDCP, deep color, multi-channel digital audio (up to 7.1 channels), and may be used with any combination of DVI (PC) or HDMI (HDTV)sources and displays.  

4100000022

HSM-I-04-02 4 x 2 HDMI Matrix Switch

4 x 2 HDMI 1.3 matrix switch with RS232 and IP control. Supports HDCP, deep color, multi-channel digital audio (up to 7.1 channels), and may be used with any combination of DVI (PC) or HDMI (HDTV) sources and displays.  

4100000023

HSM-I-04-04 4 x 4 HDMI Matrix Switch

4 x 4 HDMI 1.3 matrix switch with RS232 and IP control. Supports HDCP, deep color, multi-channel digital audio (up to 7.1 channels), and may be used with any combination of DVI (PC) or HDMI (HDTV) sources and displays.  

4100000024

HSM-I-08-08 8 x 8 HDMI Matrix Switch

8 x 8 HDMI 1.4 matrix switch with RS232 and IP control. Supports HDCP, deep color,3D, multi-channel digital audio (up to 7.1 channels), and may be used with any combination of DVI (PC) or HDMI (HDTV) sources and displays.  

4100000025

SC-1080H Multi-Format Video Scaler

The SC-1080H is a multiple format switching video scaler. It has 5 different types of video inputs and a scaled digital output The SC-1080H accepts various input formats and resolutions and scales to a specific output format and resolution. Inputs are: HDMI (up to 1080i/p), PC (from VGA (640x480) to WUXGA (1920x1200), Component Video (SD and HD from 480p to 1080i/p), S-video (NTSC or PAL) and Composite Video (NTSC or PAL). The output format and resolution can be specified as either PC (VGA (640x480) to WUXGA (1920x1200)) or Component Video (YPbPr from 480i/p to 1080i/p).  

4100000077

SC-12BT Multi-Format Scaler Switch

The Model SC-12BT is a 12 input HD Scaler that accommodates 4 HDMI, 4 VGA, and 4 AV inputs. Select any of the inputs by using front panel push- buttons, RS232 or IP commands.  

4100000026

Scaler VGA to HDMI

HDMI, HDCP, and DVI compliant. Any PC or HDTV video signal can be scaled up or scaled down to any other PC or HDTV resolution.  

4100000062

SC-HDMI-2A HDMI Scaler/Audio Extractor

Scale HDMI or DVI signal up or down and extract embedded digital audio formats to analog or digital output.  

4100000029

HDMI Cable, 10 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000003

HDMI Cable, 15 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000005

HDMI Cable, 23 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000006

HDMI Cable, 30 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000007

HDMI Cable, 46 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000008

HDMI Cable, 60 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000009

HDMI Cable, 100 m - 4K Javelin Optical

Aktives, optisches HDMI Kabel zur verlust- und störungsfreien Übertragung von hochauflösenden HDMI Signalen über große Distanzen. Stecker - Stecker (HDMI Typ A), Hochflexibel: minimaler Biegeradius ca. 5 mm, Unterstützt: 3840x2160 @ 30 Hz 3D, Deep color, xvYCC color, Audio: PCM, Dolby True HD, DTS-HD, Unterstützt: DDC, HDCP, EDID und CEC Bandbreite: 10,2 Gbps. Spannungsversorgung über die HDMI Schnittstelle, kein separates Netzteil erforderlich.  

4100000004

HR-731 HDMI/RS232 FiberOptic Extender

The HR-731 is a kit of sender and receiver modules to extend HDMI and bi-directional RS232 up to 1000 m (3280 ft) on a single multi-mode cable.  

4100000019

1 x 2 VGA Distribution Amplifier

The Model 200A is a 2-channel VGA distribution amplifier (splitter) with stereo audio and EDID routing and emulation capabilities.The RGBHV (VGA) input video signal is terminated and amplified for driving each output. The 3.5 mm audio input is ground isolated to prevent ground loop noise and hum and is also amplified for driving each output. The EDID (Extended Display ID) data that the video source sees can be routed from the LCD connected to OUTPUT 1, or emulated using internal EDID memory in the splitter. A recessed 2-position switch is used to determine the EDID routing. The internal EDID is generic and designed to render an image on most displays (please see the Downloads tab for EDID details).  

4100000000

400 - 1:4 VGA Video Splitter

Enhance presentations and displays with Hall Research's high resolution Video Splitters Distribution Amplifiers. This device allow your video signal to be displayed simultaneously on 4 monitors all as sharp and clear as the original.  

4100000001

VS-2 2:1 VGA Switch

The Model VS-2 is a versatile, compact, high performance, solid- state, 2 input x 1 output, VGA video switch that can operate at resolutions of up to 1600x1200. The unit allows one monitor to be switched between two video sources.  

4100000057

VS-2A 2:1 VGA Switch mit Audio / RS232

2-port VGA switch with Audio and Serial Control  

4100000058

VS-4A 4:1 VGA Switch mit Audio / RS232

Schaltet 4 VGA Quellen und parallel Audio auf 1 VGA Ausgang mit Audio. Das Umschalten erfolgt wahlweise automatisch, per RS232-Schnittstelle oder Tasten, zusätzlich kann der Ausgang abgeschaltet werden (Blank). Priorisierung eines Eingangs im Automatikmodus ist möglich. Eingänge: 4 x VGA (HD15), 4 x 3,5 mm Audio Klinke, 1 x RS232 (9-Pin SubD), (alle Buchse), Ausgang: 1 x VGA (HD15), 1 x 3,5 mm Audio Klinke, (alle Buchse). Unterstützt bis 1600 x 1200 oder 1080p, Bandbreite: 200 MHz.  

4100000059

VSM-A-4-4 4x44 VGA/Audio Matrix

Switch up to 4 VGA inputs to 4 VGA outputs with audio. 550 MHz bandwidth supports resolutions beyond 1920x1200.  

4100000060

VSM-I-A-4-JA4 VGA 4x4 Matrix IP Ctrll

Cross-point switching of PC or HD video and audio, 4 x additional UTP outputs for sending audio and video up to 1,000 ft (305 m) (compatible with URA series receivers), 550 MHz video bandwidth to support resolutions up to and beyond 1920 x 1200, IP configuration and control (via built-in web based software and telnet), supports EDID at all inputs  

4100000066

U2-160 USB 2.0 Extender over Cat-5/6

This device is an economical but high performance USB extender, compliant with USB 2.0 specifications.  

4100000037

U2-160-4 USB 2.0 Extender hub

The U2-160-4 is a USB 2.0 extender with built-in 4-Port Hub in the remote end for connection of up to 4 USB devices. The extender sends USB signals across a Cat-5e/6 cable up to 50 meters at data rates to 480 Mbps.  

4100000038

U2-160-DP USB 2.0 UTP Extender

This USB 2.0 Extender is capable of sending USB signals across a Cat-5e/6 cable up to 50 meters at data rates of High Speed (480 Mb/s), Full Speed (12Mb/s), or Low Speed (1.5 Mb/s).  

4100000039

EMX-DVI Single/Dual Link DVI Extender

The EMX-DVI automatically compensates for the signal degradation caused by long video cable runs of up to 50 ft (15 m) on its input and can drive long DVI cables on its output to 40 ft (12 m) by boosting and echo-canceling the DVI video output.  

4100000011

EMX-HD-AUD - HDMI Audio Extractor

This versatile device can be used to extract the audio from HDMI, extend HDMI cable length, manage EDID (pass- thru or emulate), and re-clock both TMDS video and DDC data.  

4100000012

EMX-I-AMP HDMI Audio Extractor & Amp

The EMX-I-AMP is a 4K HDMI Audio Extractor with line-level audio input and built-in 50 Watt audio amplifier for direct connection of 8 Ohm speakers. The device allows audio mixing (HDMI audio and/or analog L/R input), and volume control from the front panel and RS232. The EMX-I-AMP also provides IP connectivity which allows network control of the device using TELNET commands or via the built-in webpage control. The device also has a provision of controlling the volume remotely using a simple rotary encoder that can be mounted on a wall-plate. It also features a second Auxiliary RS232 that can be connected to a projector.  

4100000013

EMX-AMP 4K HDMI Audio Extractor

The EMX-AMP is a 4K HDMI Audio Extractor with line-level audio input and built-in 50 Watt audio amplifier for direct connection of 8 Ohm speakers. The device allows audio mixing (HDMI audio and/or analog L/R input), and volume control from the front panel and RS232 The device also has a provision of controlling the volume remotely using a simple rotary encoder that can be mounted on a wall-plate. It also features a second Auxiliary RS232 that can be connected to a projector. Using the primary RS232 input the user can send power on/off commands to the display through the Auxiliary RS- 232 port.  

4100000010

GLI-3.5mm Audio Ground-Loop Isolator

Model GLI-3.5mm Stereo Audio Ground- Loop Isolator & Filter with 3.5mm connectors. Eliminates ground loop noise between any audio source such as a notebook PC and audio equipment. Perfect frequency response of +.03 dB from 20 to 20,000 Hz  

4100000014

GLI-RCA Stereo Ground-Loop Isolator

Eliminiert Brummgeräusche durch Masseschleifen bei unsymmetrischer Audioübertragung. Eingang: Stereo-Cinch (Buchse), Ausgang: Stereo-Cinch (Stecker). Nahezu perfektes Ansprechverhalten: +/-0,03 dB im Höhrbereich zwischen 20 und 20,000 Hz. Kunststoffgehäuse, schwarz Abmessungen: 4,2 x 3,2 x 2,5 cm. (Auch als 3,5 mm Klinke Version verfügbar: 4100000014)  

4100000015

HD-AUD HDMI Repeater & Audio Extractor

Use this compact HDMI repeater to buffer HDMI signals (helps resolve compatibility issues) and extract the stereo audio (analog L/R) from the video.  

4100000016

USB-EDID-PRO2 Reader / Programmer

The USB-EDID-PRO2 can be used to read the EDID from any VGA, DVI or HDMI monitor, or similar device. It can also program a new EDID back into the device (if target is write enabled and allows programming).  

4100000056

DAC51 Audio Converter (Digital/Analog)

Konvertiert digitale Audiosignale in ein analoges Stereo-Audiosignal. Integrierter 24bit Audio DSP und 192kHz Audio DAC zur Konvertierung von digitalen Audiosignalen inkl. PDM, DTS/AC3 in ein analoges Stereo Signal. Intelligenter Algorithmus zur Konvertierung von Mehrkanal Audiosignalen. Eingang: Toslink und Koax (Cinch), Mini-USB (als Netzanschluss), Ausgang: 3,5 mm Stero-Klinke und 2x Cinch Stereo, Frequenzbereich: 20Hz - 20kHz, Gewicht: 40 Gramm, Abmessungen: 75 x 55 x 20 mm, Spannungsversorgung: 5VDC/1A.  

4100000068

HR-16P 16-Channel Serial Device

The Model HR-16P is a programmable RS232 serial device designed to control any device with a serial port. The HR-16P has 16 discrete inputs that sense a DC voltage level or contact closure (see figure below for input terminal configuration).  

4100000017

HR-4P RS232, IR, I/O Controller

4 separated contact or current sensor inputs, recognises status changes to the inputs and initiates a previously defined RS232 or IR command, e.g. closing of the mirror flap etc. Inputs: 4 I/Os (euroblock) Output: RS232 9-Pin SubD plug Input/Output: IR (3.5 mm jack, socket)  

4100000018

SW3-UI-WP Auxillary KeypadController

This keypad plugs into the UHBX-SW3-WP using a Cat-5 cable and can be located up to 200 ft away at a convenient location. The SW3-UI duplicates all the controls and indicators that are on the wall plate.  

4100000035

SW3-UI-VOL Auxillary Keypad Controller

This keypad plugs into the UHBX-SW3-WP using a Cat-5 cable and can be located up to 200 ft away at a convenient location. The SW3-UI-VOL duplicates all the controls and indicators that are on the wall plate.  

4100000036

511-POH-17W PoH Power Inserter

The 511-POH-17W is a PoH compliant power inserter that can be used to power one end of an HDBaseT link. It passes the UTP signals across while at the same time injects 48V power for the PD (powered device).  

4100000002

511-PS4812 POH Power supply

Universal Power Supply with IEC320 input and 48V @ 1.2A output 100 - 240 VAC in, 48V DC 60W out with 4-Pin MiniDIN plug  

4100000061

Product Search